移植典型的實時嵌入式操作系統μc/OS-II 到SPCE061 高性能處理器平臺,結合工程項目對于溫度濕度氧濃度的要求,構建了實時嵌入式多傳感器測控系統。介紹了硬件電路的設計,研究了實時操作系統任務分配和移植技術。實踐試驗證明：溫度濕度氧濃度三個參數測
控范圍和精度達到了設計目標,同時系統具有數據傳輸保存等功能,滿足了工程要求。
關鍵詞：多傳感器；實時操作系統；嵌入式系統；移植；測控
Abstract: This paper constructed a real time embedded multi-sensors measuring and controlling system by transplanting the typical real-time operation system μc/OS-II to the high-performance micro-processor SPCE061 and combining the engineering request to the temperature ,humidity and O2-thickness. It introduced the design of the hardware and studied the task allot of the real-time operation system and the transplanting technics. The experiments showed that the measuring and controlling range or precision satisfied the plan aim of the three parameters about temperature ,humidity and O2-thickness, simultaneously the target system also had the functions as data transition and storing ,etc. which contented to the engineering demands.
Keywords: Multi-sensors; Real Time Operation System (RTOS); the Embedded System;
Transplant Techniques; Measuring and Controlling