Linux下flash操作讀、寫、擦除步驟 - 全文

1、背景介紹

在板上，ZYNQ PL部分通過EMC連接一片NOR FLASH，地址空間如下：

可以看到NOR FLASH的起始地址為0x80000000，這是物理地址，可以把數據存放在以該地址起始的一段區域。

需要注意的是，在對NOR FLASH進行讀寫數據時，需要參考對應的datasheet，例如這里選用的NOR FLASH讀、寫、擦除步驟如下：

通過上面的表格就知道進行相應操作每一步該做什么，可以轉換為SDK中裸奔程序的C代碼。

2、 Linux下flash操作
之前提到過zynq中Linux用戶應用程序可以通過/dev/mem訪問到物理地址，xil_in32和xil_out32等裸奔程序中常見的函數可以通過這一機制移植到linux下。于是，對flash的操作其實就是基于xil_in和xil_out對物理地址進行讀寫。

這里只需要實現三個函數，erase，write_sector以及read_sector.代碼如下：

//xil_io.h

#include

#define PAGE_SIZE ((size_t)getpagesize())

#define PAGE_MASK ((uint64_t) (long)~(PAGE_SIZE - 1))

void Xil_Out32(uint64_t phyaddr, uint32_t val)
{
int fd;
volatile uint8_t *map_base;
uint64_t base = phyaddr & PAGE_MASK;
uint64_t pgoffset = phyaddr & (~PAGE_MASK);

if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
{
perror("open /dev/mem:");
}

map_base = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED,
fd, base);
if(map_base == MAP_FAILED)
{
perror("mmap:");
}
*(volatile uint32_t *)(map_base + pgoffset) = val;
close(fd);
munmap((void *)map_base, PAGE_SIZE);
}

int Xil_In32(uint64_t phyaddr)
{
int fd;
uint32_t val;
volatile uint8_t *map_base;
uint64_t base = phyaddr & PAGE_MASK;
uint64_t pgoffset = phyaddr & (~PAGE_MASK);
//open /dev/mem
if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
{
perror("open /dev/mem:");
}
//mmap
map_base = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED,
fd, base);
if(map_base == MAP_FAILED)
{
perror("mmap:");
}
val = *(volatile uint32_t *)(map_base + pgoffset);
close(fd);
munmap((void *)map_base, PAGE_SIZE);

return val;
}

void Xil_Out16(uint64_t phyaddr, uint16_t val)
{
int fd;
volatile uint8_t *map_base;
uint64_t base = phyaddr & PAGE_MASK;
uint64_t pgoffset = phyaddr & (~PAGE_MASK);

if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
{
perror("open /dev/mem:");
}

map_base = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED,
fd, base);
if(map_base == MAP_FAILED)
{
perror("mmap:");
}
*(volatile uint16_t *)(map_base + pgoffset) = val;
close(fd);
munmap((void *)map_base, PAGE_SIZE);
}

int Xil_In16(uint64_t phyaddr)
{
int fd;
uint16_t val;
volatile uint8_t *map_base;
uint64_t base = phyaddr & PAGE_MASK;
uint64_t pgoffset = phyaddr & (~PAGE_MASK);
//open /dev/mem
if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
{
perror("open /dev/mem:");
}
//mmap
map_base = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED,
fd, base);
if(map_base == MAP_FAILED)
{
perror("mmap:");
}
val = *(volatile uint16_t *)(map_base + pgoffset);
close(fd);
munmap((void *)map_base, PAGE_SIZE);

return val;
}

void Xil_Out8(uint64_t phyaddr, uint16_t val)
{
int fd;
volatile uint8_t *map_base;
uint64_t base = phyaddr & PAGE_MASK;
uint64_t pgoffset = phyaddr & (~PAGE_MASK);

if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
{
perror("open /dev/mem:");
}

map_base = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED,
fd, base);
if(map_base == MAP_FAILED)
{
perror("mmap:");
}
*(volatile uint8_t *)(map_base + pgoffset) = val;
close(fd);
munmap((void *)map_base, PAGE_SIZE);
}

int Xil_In8(uint64_t phyaddr)
{
int fd;
uint8_t val;
volatile uint8_t *map_base;
uint64_t base = phyaddr & PAGE_MASK;
uint64_t pgoffset = phyaddr & (~PAGE_MASK);
//open /dev/mem
if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
{
perror("open /dev/mem:");
}
//mmap
map_base = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED,
fd, base);
if(map_base == MAP_FAILED)
{
perror("mmap:");
}
val = *(volatile uint8_t *)(map_base + pgoffset);
close(fd);
munmap((void *)map_base, PAGE_SIZE);

return val;
}

//move.h

#ifndef SMARTCARMOVE_H
#define SMARTCARMOVE_H

#include
#include
#include
#include
#include
#include
#include
#include
#include

static int fd;

#define MODE (O_WRONLY | O_TRUNC)

#define SECSIZE 65536
#define XPAR_AXI_EMC_0_S_AXI_MEM0_BASEADDR 0x80000000
#define WAIT_TICKS 0xffffffff

typedef unsigned short u16;

extern void flash_set16(unsigned int addrBase,unsigned int addrOffset,unsigned int value);
extern int flash_get16(unsigned int addrBase,unsigned int addrOffset);

extern int Erase_Flash(int sectorNum);
extern int Write_Sector(int sectorNum,int offset,u16 *src_addr,int wr_num);
extern int Read_Sector(int sectorNum,int rd_num,unsigned short *buf);

#endif

[cpp] view plain copy print?
#include "xil_io.h"
#include "move.h"

/**
read and write phy mem
* */
void flash_set16(unsigned int addrBase,unsigned int addrOffset,unsigned int value)
{
Xil_Out16(addrBase+2*addrOffset, value);
//printf("flash set reg 0x%x value is 0x%x\n",addrBase+2*addrOffset,value);
}

int flash_get16(unsigned int addrBase,unsigned int addrOffset)
{
int ans=0;
ans=Xil_In16(addrBase+2*addrOffset);
return ans;
}

int Erase_Flash(int sectorNum)
{
unsigned short flag;
int i=0;
int val=0;
unsigned short *base_addr;
base_addr = (unsigned short*)(XPAR_AXI_EMC_0_S_AXI_MEM0_BASEADDR+SECSIZE*sectorNum*2);
printf("erase start addr 0x%x\n",base_addr);

flash_set16(base_addr,0x555,0x00AA);
flash_set16(base_addr,0x2AA,0x0055);
flash_set16(base_addr,0x555,0x0080);
flash_set16(base_addr,0x555,0x00AA);
flash_set16(base_addr,0x2AA,0x0055);
flash_set16(base_addr,0,0x0030);

val=flash_get16(base_addr,0);
printf("base addr 0x%x val is 0x%x\n",base_addr,val);

while((val&0x80)!=0x80)
{
i++;
if( i>=WAIT_TICKS)
{
printf("addr %x Erase_Flash failed!\n",base_addr);
flash_set16(base_addr,0x555,0x0090);
flash_set16(base_addr,0x000,0x0000);
return -1;
}
//flag = base_addr;
val=flash_get16(base_addr,0);
}
flash_set16(base_addr,0x555,0x0090);
flash_set16(base_addr,0x000,0x0000);

printf("erase end addr %x\n",base_addr+SECSIZE);
return 0;
}

int Write_Sector(int sectorNum,int offset,u16 *src_addr,int wr_num)
{
int i,j;
u16 *dst_addr;
int val=0;
int ans=0;
dst_addr = (u16*)(XPAR_AXI_EMC_0_S_AXI_MEM0_BASEADDR+SECSIZE*sectorNum*2+offset);

/* Unlock Bypass program */

flash_set16(dst_addr,0x555,0x00AA);
flash_set16(dst_addr,0x2AA,0x0055);

printf("dst addr is 0x%x\n",dst_addr);
for(i=0;i

閱讀全文

上一頁 1 2全文