reboot命令

//kernel\sys.c

magic1、magic2，兩個int類型的“魔力數(shù)”，用于防止誤操作。具體在“include/uapi/linux/reboot.h”中定義。

cmd，reboot方式。

//include\linux\reboot.h

#define LINUX_REBOOT_CMD_RESTART 0x01234567
#define LINUX_REBOOT_CMD_HALT 0xCDEF0123
#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF
#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000
#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC
#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4
#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
#define LINUX_REBOOT_CMD_KEXEC 0x45584543

arg，其它的額外參數(shù)。

SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,?void __user *, arg)

{

...

switch (cmd)

{

case LINUX_REBOOT_CMD_RESTART:
kernel_restart(NULL);
break;

case LINUX_REBOOT_CMD_CAD_ON:
C_A_D = 1;
break;

case LINUX_REBOOT_CMD_CAD_OFF:
C_A_D = 0;
break;

case LINUX_REBOOT_CMD_HALT:
kernel_halt();
do_exit(0);
panic("cannot halt");

case LINUX_REBOOT_CMD_POWER_OFF:
kernel_power_off();
do_exit(0);
break;

case LINUX_REBOOT_CMD_RESTART2:
if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0)

{

ret = -EFAULT;
break;
}
buffer[sizeof(buffer) - 1] = '\0';

kernel_restart(buffer);
break;

#ifdef CONFIG_KEXEC
case LINUX_REBOOT_CMD_KEXEC:
ret = kernel_kexec();
break;
#endif

#ifdef CONFIG_HIBERNATION
case LINUX_REBOOT_CMD_SW_SUSPEND:
ret = hibernate();
break;
#endif

default:
ret = -EINVAL;
break;

...

}

//kernel\sys.c

void kernel_restart(char *cmd)

{

...

machine_restart(cmd);

}

//arch\arm\kernel\process.c

void machine_restart(char *cmd)

{

...

arm_pm_restart(reboot_mode, cmd);

...

}

//arch\arm\kernel\setup.c

void __init setup_arch(char **cmdline_p)

{

struct machine_desc *mdesc;

...

mdesc = setup_machine_fdt(__atags_pointer);

...

if (mdesc->restart)

arm_pm_restart = mdesc->restart;

...

}

//arch\arm\mach-hi3516a\core.c

MACHINE_START(HI3516A, "hi3516a")

.atag_offset = 0x100,
.map_io = hi3516a_map_io,
.init_early = hi3516a_init_early,
.init_irq = hi3516a_gic_init_irq,
.handle_irq = gic_handle_irq,
.timer = &hi3516a_sys_timer,
.init_machine = hi3516a_init,
.reserve = hi3516a_reserve,
.restart = hi3516a_restart,
MACHINE_END

//arch\arm\mach-hi3516a\core.c

void hi3516a_restart(char mode, const char *cmd)

{
__raw_writel(~0, IO_ADDRESS(SYS_CTRL_BASE) + REG_SC_SYSRES);
}

//drivers\mtd\devices\hisfc350\hisfc350_hi3516a.c

#define SYS_CTRL_BASE?(0x20050000)

//arch\arm\mach-hi3535\include\mach\platform.h

#define REG_SC_SYSRES?0x4

?